There are many style designs of corrugated boxes, RSC, FOL, FTCT, FTCB, HSC, FPF, and Die Cuts just to name a few. Our Sales professionals together with our Designing department have the knowledge to help you design and choose the best quality and cost effective way to display your product. Our Packaging designers create a well designed Corrugated Box to meet the particular needs of the product being shipped, the hazards of the shipping environment, (shock, vibration, compression, moisture, etc.), and the needs of retailers and consumers. The corrugated material we obtain from the Forestry Industry is an environmental managed product. Sometimes a recycled material is requested to produce a packaging product which helps conserve natural resources and energy. Our Industry is managed to sustain environmental resources for future generations.
These are some of the custom box designs & styles we offer. More styles are available. Scroll down to see our boxes.
This is the most common style container. All flaps are the same length and the major flaps meet in the center of the box.
A variation of the RSC, the HSC has only 1 set of flaps. The opposite side of the box is completely open, allowing it to slide over an item.
The FOL is similar to the RSC excep the major flaps fully overlap. All the flaps have the same length, the width of the box.
The inner and outer flaps are different lengths. Both pairs of flaps meet at the center of the box. The inner flaps meet in as they do provide a level rest for the contents of the box.
The OSC is similar to the RSC except the outer flaps overlap a specified amount but not less than 1 inch. The inner flaps do not meet.
This box type has two fully telescoping sections. The sections may be formed by staples, die cut locks, adhesive, etc.
With this box, all flaps have the same length. The outer flaps overlap by 1 inch or more.
This box has five long panels, one of which fully overlaps. The ends also fully overlap.
This box is cut so that it has a flat bottom with flaps forming the sides and ends, and extensions of the side flaps meeting to form the top.
Pads are plain sheets of corrugated board cut to a specific size. Pads are often used to separate layers of product within a box.
Like the FF5PF, this box has five long panels. However, the outer flaps meet instead of overlapping.
By Die Cutting a box, special sizes and a high degree of customization can be achieved. This process ensures a high degree of accuracy in size and consistency and allows for almost any shape or style of box to be manufactured.
CCP is a leading distributor of shipping and packaging materials to businesses across a wide spectrum of industries. Our products combine top quality with competitive pricing. We can meet almost any packaging need and still stay within your budget.